GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 334019  Size: SH
  1. Remove the front door garnish molding. Refer to Front Side Door Front Garnish Molding Replacement.
  2. Remove the electrical connector from the rearview mirror.
  3. Remove the nuts that retain the rearview mirror filler to the door.
  4. Remove the rearview mirror filler from the door.

Installation Procedure


    Object Number: 334019  Size: SH
  1. Install the rearview mirror filler to the door.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the nuts in order to retain the rearview mirror filler to the door.
  4. Tighten
    Tighten the nuts to 10 N·m (89 lb in).

  5. Install the front door front garnish molding. Refer to Front Side Door Front Garnish Molding Replacement.