Removal Procedure
- Remove the black caps from the mirror bracket.
- If equipped with the lighted mirror, disconnect the electrical connector.
- Remove the nuts that retain the outside rearview mirror to the mirror bracket.
- Remove the outside rearview mirror from the vehicle.
Installation Procedure
- Install the outside rearview mirror to the vehicle.
- Align the holes in the outside rearview mirror to the mirror bracket.
Caution: Refer to Fastener Caution in the Preface section.
- Install the nuts that retain the outside rearview mirror to the bracket.
Tighten
Tighten the nuts to 25 N·m (18 lb ft).
- Install the black caps that cover the mirror nuts.
- If equipped with the lighted mirror, connect the electrical connector.