GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Kodiak C-Series (Conventional) C6/C7/C8 🢒 Steering 🢒 Power Steering 🢒 End Limiters Replacement

Removal Procedure
  1. Position the front wheels and the steering wheel straight ahead.
  2. Place a container under the power steering gear in order to catch fluid when removing the end limiters.

    3. Object Number: 905572 Size: SH
  3. Remove the following components from the steering gear:
    4. • The top end limiter (1)
    • The O-ring (2)
  4. Remove the following components from the steering gear:
    5. • The bottom end limiter (1)
    • The O-ring (2)

Installation Procedure

    Object Number: 905572 Size: SH
  1. Install the following components into the steering gear:

    2. Caution: Refer to Fastener Caution in the Preface section.

    • The O-ring (2)
    • The bottom end limiter (1)

    Tighten
    Tighten the end limiter to 12 N·m (106 lb in).

  2. Install the following components into the steering gear:
    3. • The O-ring (2)
    • The top end limiter (1)

    Tighten
    Tighten the end limiter to 12 N·m (106 lb in).

  3. Fill and bleed the power steering system. Refer to Power Steering System Bleeding.
Loading…
Loading the web debug toolbar…
Attempt #