GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Drain the reservoir.

  2. Object Number: 798041  Size: SH

    Important: Cap the hoses in order to prevent dirt from entering the system.

  3. Remove the hoses from the reservoir.

  4. Object Number: 798028  Size: SH
  5. Remove nuts holding the reservoir.
  6. Remove the reservoir.

Installation Procedure


    Object Number: 798028  Size: SH
  1. Install the reservoir to the vehicle.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the washers and the nuts.
  4. Tighten
    Tighten the reservoir mounting nuts to 28 N·m (21 lb ft). 


    Object Number: 798041  Size: SH
  5. Connect the hoses to the reservoir.
  6. Bleed the system. Refer to Power Steering System Bleeding .