Power Steering Gear Inlet Pipe/Hose Replacement L18 Hydroboost

Notice: Do not start the vehicle with any power steering gear inlet or outlet hoses disconnected. When disconnected, plug or cap all openings of components. Failure to do so could result in contamination or loss of power steering fluid and damage to the system.

1. Install a drain pan under the vehicle.
2. Remove the power steering gear inlet hose from the brake booster outlet hose if equipped with JE3. Refer to Power Steering Hose Quick Connect Fitting .
3. Remove the power steering gear inlet hose from the power steering pump if equipped with JE4. Refer to Power Steering Hose Quick Connect Fitting .



4. Remove the power steering gear inlet hose from the power steering gear. Refer to Power Steering Hose Quick Connect Fitting .
5. Remove the power steering gear inlet hose from the vehicle.

Notice: The inlet and outlet hoses must not be twisted during installation. Do not bend or distort the inlet or outlet hoses to make installation easier. Failure to follow these procedures could result in component damage.

1. Route the hose in the same position the hose occupied prior to removal.
2. Install the power steering gear inlet hose to the power steering gear. Refer to Power Steering Hose Quick Connect Fitting .



3. Install the power steering gear inlet hose to the power steering pump outlet if equipped with JE4.



4. Install the power steering gear inlet hose to the power brake booster outlet hose if equipped with JE3. Refer to Power Steering Hose Quick Connect Fitting .
5. Remove the drain pan from under the vehicle.
6. Bleed the power steering system. Refer to Power Steering System Bleeding .

Power Steering Gear Inlet Pipe/Hose Replacement LB7, L18 w/ Hydromax

Notice: Do not start the vehicle with any power steering gear inlet or outlet hoses disconnected. When disconnected, plug or cap all openings of components. Failure to do so could result in contamination or loss of power steering fluid and damage to the system.

1. Install a drain pan under the vehicle.
2. Remove the power steering gear inlet hose from the power steering pump. Refer to Power Steering Hose Quick Connect Fitting .
3. Remove the clips and isolators holding the power steering gear inlet hose to the frame.



4. Remove the power steering gear inlet hose from the power steering gear. Refer to Power Steering Hose Quick Connect Fitting .
5. Remove the power steering gear inlet hose from the vehicle.

Notice: The inlet and outlet hoses must not be twisted during installation. Do not bend or distort the inlet or outlet hoses to make installation easier. Failure to follow these procedures could result in component damage.

1. Route the hose in the same position the hose occupied prior to removal.
2. Install the power steering gear inlet hose to the power steering gear. Refer to Power Steering Hose Quick Connect Fitting .
3. Install the clips and isolators holding the power steering gear inlet hose to the frame.



4. Install the power steering gear inlet hose to the power steering pump outlet . Refer to Power Steering Hose Quick Connect Fitting .
5. Remove the drain pan from under the vehicle.
6. Bleed the power steering system. Refer to Power Steering System Bleeding .

Power Steering Gear Inlet Pipe/Hose Replacement LG5

Notice: Do not start the vehicle with any power steering gear inlet or outlet hoses disconnected. When disconnected, plug or cap all openings of components. Failure to do so could result in contamination or loss of power steering fluid and damage to the system.

1. Install a drain pan under the vehicle.
2. Remove the power steering gear inlet hose from the power steering pump. Refer to Power Steering Hose Quick Connect Fitting .



3. Remove the power steering gear inlet hose from the power steering gear. Refer to Power Steering Hose Quick Connect Fitting .
4. Remove the power steering gear inlet hose from the vehicle.

Notice: The inlet and outlet hoses must not be twisted during installation. Do not bend or distort the inlet or outlet hoses to make installation easier. Failure to follow these procedures could result in component damage.

1. Route the hose in the same position the hose occupied prior to removal.
2. Install the power steering gear inlet hose power steering gear. Refer to Power Steering Hose Quick Connect Fitting .



3. Install the power steering gear inlet hose to the power steering pump. Refer to Power Steering Hose Quick Connect Fitting .
4. Remove the drain pan from under the vehicle.
5. Bleed the power steering system. Refer to Power Steering System Bleeding .

Power Steering Gear Inlet Pipe/Hose Replacement LG4

Notice: Do not start the vehicle with any power steering gear inlet or outlet hoses disconnected. When disconnected, plug or cap all openings of components. Failure to do so could result in contamination or loss of power steering fluid and damage to the system.

1. Install a drain pan under the vehicle.
2. Remove the power steering gear inlet hose from the power steering pump. Refer to Power Steering Hose Quick Connect Fitting .



3. Remove the power steering gear inlet hose from the engine brackets. Refer to Power Steering Hose Quick Connect Fitting .



4. Remove the power steering gear inlet hose from the power steering gear. Refer to Power Steering Hose Quick Connect Fitting .
5. Remove the power steering gear inlet hose from the vehicle.

Notice: The inlet and outlet hoses must not be twisted during installation. Do not bend or distort the inlet or outlet hoses to make installation easier. Failure to follow these procedures could result in component damage.

1. Route the hose in the same position the hose occupied prior to removal.
2. Install the power steering gear inlet hose power steering gear. Refer to Power Steering Hose Quick Connect Fitting .



3. Install the power steering gear inlet hose to the engine brackets. Refer to Power Steering Hose Quick Connect Fitting .



4. Install the power steering gear inlet hose to the power steering pump. Refer to Power Steering Hose Quick Connect Fitting .
5. Remove the drain pan from under the vehicle.
6. Bleed the power steering system. Refer to Power Steering System Bleeding .