| Table 1: | Chime Module |
| Table 2: | Instrument Panel Cluster (IPC) |
| Table 3: | Powertrain Control Module (PCM) |
| Table 4: | Radio |
The scan tool data lists contain all of the instrument panel, gages, and console related parameters that are available on the scan tool. The parameters in the list are arranged in alphabetical order. The data list column indicates the location of the parameter within the scan tool menu selections.
Use the scan tool data lists in order to complete a diagnostic table or in order to supplement the diagnostic procedures. Begin all of the diagnostic procedures with the Diagnostic System Check - Instrument Cluster or the Diagnostic System Check - Audible Warnings .
Use the scan tool data lists only in the following circumstances:
| • | There is not any published DTC procedure nor any published symptom procedure for the customer concern. |
| • | The DTC procedure or the symptom procedure indicated by the diagnostic system check does not resolve the customer concern. |
The typical data values are from a vehicle that is operating correctly under the conditions specified in the first row of the scan tool data list table. Comparison of the parameter values from the suspected vehicle with the typical data values may reveal the source of the customer concern.
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF/Seat Belt Buckled/High Beams Off/Park Brake Unapplied | |||
Chime | Data | On/Off | Off |
Ign. Since Current DTC | Data | Cycles | varies |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF/Seat Belt Buckled/High Beams Off/Park Brake Unapplied | |||
8 Digit GM Part Number | Module Information 1 | -- | varies |
ABS Lamp | Outputs | On/Off | Off |
Air Bag Lamp | Outputs | On/Off | Off |
Battery | Outputs | On/Off | Off |
Battery Voltage | Data | Voltage | varies |
Brake Lamp | Outputs | On/Off | Off |
Change Engine Oil | Outputs | On/Off | Off |
Check Eng Oil Level | Outputs | On/Off | Off |
Check Gages Lamp | Outputs | On/Off | Off |
Crank Voltage | Data | Voltage | varies |
Displayed Battery Voltage | Data | Voltage | varies |
Displayed Coolant Temp. | Data | Celsius (Fahrenheit) | varies |
Displayed Oil Pressure | Data | kPa/psi | varies |
Displayed Fuel Level | Data | Percent | varies |
Displayed Odometer | Data | Kilometer (Miles) | varies with milage of vehicle |
Displayed Trip Odometer | Data | Kilometer (Miles) | varies with milage of vehicle |
Engine Shutdown Indicator | Outputs | On/Off | Off |
Engine Speed | Data | RPM | 0 RPM |
Fasten Seat Belts | Outputs | On/Off | Off |
Ignition 0 | Data | Volts | 0 - 19 Volts |
Ignition 1 | Data | Volts | 0 - 19 Volts |
Ign. Since Current DTC | Data | Cycles | varies |
Low Coolant | Outputs | On/Off | Off |
Monitored Coolant Temp. | Data | Celsius (Fahrenheit) | varies |
Monitored Fuel Level | Data | Percent | varies |
Monitored Oil Pressure | Data | kPa (psi) | varies |
Overspeed Lamp | Outputs | On/Off | Off |
PRNDL State | Inputs | Park / Reverse / Neutral / Overdrive / Drive / 1st / 2nd / Invalid | Park |
Reduced Engine Power | Outputs | On/Off | Off |
Trip Reset Switch | Inputs | Active/Inactive | Inactive |
Vehicle Speed | Data | miles per hour (kilometers per hour) | 0 mph (0 km/h) |
Year Module Built | Module Information | -- | varies |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Engine Idling/Normal Operating Temperature | |||
Battery Voltage | Engine 1 | Voltage | varies |
Check Trans. Lamp | Engine 1 | On/Off | Off |
Coolant Level Switch | Engine 2 | Ok/Low | Ok |
ECT Sensor | Engine 1 Engine 2 Enhanced EVAP Fuel System | Celsius (Fahrenheit) | 85-105°C (185-220°F) |
Engine Oil Level Switch | Engine 1 Engine 2 | Ok/Low | Ok |
Engine Oil Life Remaining | Engine 1 Engine 2 | Percent | 0-100% |
Engine Oil Pressure Sensor | Engine 2 | Volts | varies |
Engine Speed | Engine 1 Engine 2 Enhanced EVAP Fuel System IPC | RPM | ±100 RPM from Desired Idle Speed |
Fuel Level Sensor | Fuel System | Percent | 0-100% |
Fuel Level Sensor | Enhanced EVAP | Volts | 0-5 Volts |
Fuel Level Sensor Rear | Enhanced Evap | Volts | 0-5 Volts |
Fuel Level Sensor Rear | Fuel System | Volts | 0-5 Volts |
Fuel Tank Level Remaining | Enhanced EVAP | Gallons (Liters) | varies |
Fuel Tank Level Remaining | Enhanced EVAP | Percent | 0-100% |
Fuel Tank Rated Capacity | Enhanced EVAP | Gallons (Liters) | varies with fuel tank size |
Glow Plug Relay | Engine 1 | On/Off | Off |
Ignition 1 Signal | Engine 1 Engine 2 Enhanced EVAP | Volts | 9-16V varies |
Low Coolant Level | Engine 1 | Yes/No | No |
Low Oil Lamp Command | Engine 2 | On/Off | Off |
MIL Command | Engine 1 Engine 2 IPC | On/Off | Off |
Reduced Engine Power | Engine 1 EGR TAC | Yes/No | No |
Vehicle Speed Sensor | Engine 1 Engine 2 Enhanced EVAP IPC Fuel System | kilometers per hour (miles per hour) | 0 km/h (0 mph) |
Wait to Start | Engine 1 | On/Off | Off |
Water in Fuel | Engine 1 | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF/Seat Belt Buckled/High Beams Off/Park Brake Unapplied | |||
Battery Voltage | Data | Volts | 9-16V varies |
Chime Type | Data | Fast / Medium / Medium Slow / Slow / Off | Off |
