MANUAL UPDATE SEC. 3D FRONT & REAR ROD TORQUE SPECS.

Model and Year: 1990 W CAR

TO: ALL CHEVROLET DEALERS

The torque specification on the front and rear rod to crossmember nut (see illustration) has been revised to 110 N.m + 60 degrees (81 lb. ft.) + 60 degrees for the 1990 Chevrolet Lumina Service Manual.

Model Year Pages ----------- ------ 1990 3D-4, 3D-8, 3D-9, 3D-10, 3D-11

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.