MANUAL UPDATE-STABILIZER SHAFT BRACKET TORQUE SPEC.

VEHICLES AFFECTED: 1990 CHEVROLET LUMINA

The torque specification on the stabilizer shaft bracket bolt to lower control arm has been revised from 47 N.m (35 ft.lbs.) to 53 N.m (39 ft.lbs.) for the following pages in the 1990 Chevrolet, pages 3C-7, 3C-10 and 3C-12.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.