SER. MAN. UPDATE SEC.6A STRUT TO ENGINE BRKT. BOLT TORQUE. Chevrolet Lumina 1990

SERVICE MANUAL UPDATE

SECTION 6A

THE STRUT-TO-ENGINE BRACKET BOLT TORQUE SPECIFICATION FOR THE 3.1L V6 VIN CODE T (LHO) SHOWN UNDER "ROTATING ENGINE" WAS LISTED AS 70 N.M (51 LBS. FT.). THE CORRECT SPECIFICATION IS 43 N.M (32 LBS. FT.).

1990 CHEVROLET LUMINA PAGE 6A5-2 PONTIAC GRAND PRIX PAGE 6A5-2 PONTIAC GRAND PRIX STE PAGE 6A5-1 BUICK REGAL PAGE 6A5-2

1991 CHEVROLET LUMINA PAGE 6A5-6 PONTIAC GRAND PRIX PAGE 6A5-6 BUICK REGAL PAGE 6A5-6

PLEASE NOTE THIS INFORMATION IN YOUR COPIES OF THE ABOVE SERVICE MANUALS.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.