SOME CUSTOMERS MAY COMMENT THAT THE VEHICLE EXHIBITS A CONDITION OF BINDING OR STICKING LOCK ROD ON FRONT DOORS.
HOT MELT GLUE THAT MELTS DURING HIGH AMBIENT TEMPERATURES MAY BE STUCK TO THE INSIDE LOCK ROD ON THE BACK SIDE OF THE WATER DEFLECTOR NEAR THE INSIDE DOOR HANDLE.
THE ENERGY ABSORBER PADS LOCATED ON THE DOOR INNER PANELS OF COUPE MODELS ARE AN INTEGRAL PART OF THE OCCUPANT PROTECTION SYSTEM. IF FOR ANY REASON THESE PADS ARE DESTROYED OR BROKEN, THEY MUST BE REPLACED WITH NEW PARTS FROM GMSPO, PART NUMBERS LISTED BELOW. SEE ILLUSTRATION FOR IDENTIFICATION.
THE SEDAN STYLES DO NOT HAVE ENERGY ABSORBERS ON FRONT DOORS.
COUPE DOORS: RH: 10169694 LH: 10169695
REPLACE BOTH RH AND LH WATER DEFLECTORS, THE NEW WATER DEFLECTOR HAS A NEW TYPE OF ADHESIVE.
DEFLECTOR P/N'S:
LUMINA: RH 10167918 LH 10167919
MONTE CARLO: RH 10167826 LH 10167827
PARTS ARE CURRENTLY AVAILABLE FROM GMSPO.
FOR VEHICLES REPAIRED UNDER WARRANTY, USE: LABOR OPERATION: T2594 LABOR TIME: 1.7 HR.
FIGURES: 1
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1995 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.