GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1996 🢒 Lumina 🢒 Engine 🢒 Engine Mechanical - 3.1L and 3.4L 🢒 Engine Flywheel Replacement

Removal Procedure
  1. Remove the automatic transaxle. Refer to Automatic Transaxle.

    2. Object Number: 54396 Size: SH
  2. Remove the flywheel bolts.
  3. Remove the flywheel retainer.
  4. Remove the flywheel.
  5. Clean the flywheel bolt threads and bolt holes.

Installation Procedure

    Object Number: 54396 Size: SH
  1. Install the flywheel.
  2. Install the flywheel retainer.
  3. Install the flywheel bolts.

    4. Tighten
    Tighten the bolts to 83 N·m (61 lb ft).

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the automatic transaxle. Refer to Automatic Transaxle.