For 1990-2009 cars only
- Lubricate the oil pump drive o-ring with engine oil.
- Install the oil pump drive o-ring.
- Lubricate the drive gear with grease.
- Install the oil pump drive.
- Install the oil pump drive clamp and the mounting bolt.
Tighten
Tighten the oil pump drive mounting bolt to 36 N·m (27 lb ft).
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
