For 1990-2009 cars only
- Inspect the input clutch housing assembly (632) for the following:
- With the ball check valve assembly in its seated position in transmission fluid, Inspect the assembly for leaks.
- Inspect the input clutch piston (636) for the following:
- Inspect the input clutch spring and retainer assembly (637) for a damaged cage and distorted or missing springs.
- Inspect the third clutch piston housing (639) for damage.
- Inspect the third clutch spring retainer and guide assembly (643) for a damaged cage and distorted or missing springs.
- Replace the third clutch piston and seal assembly (642).
- Inspect the input shaft thrust bearing assembly (644) for damage or wear.
| • | Plugged feed passages |
| • | Worn or damaged splines |
| • | Input shaft bushing (631) wear |
| • | Seal ring groove nicks or burrs |
| • | Cracks or blocked fluid passages in the input shaft |
| • | Damage or wear to the thrust bearing (723) in the input clutch housing |
| • | Cracks or damage to seal grooves |
| • | Wear on piston lugs |
Important: Do not attempt to reuse the third clutch piston and seal assembly.
