Removal Procedure
- Drain the coolant from the radiator. Refer to
Cooling System Draining and Filling
.
- Remove the radiator drain
plug and seal. The seal usually comes out attached to the plug.
- Disengage the locking tabs from the side tank and remove the body
of the drain plug.
- Clean the drain and the drain plug.
Installation Procedure
- Install the seal on the
drain plug stem.
- Install the drain plug. Make sure that the body is fully seated
in the side tank and that the locking tabs are engaged.
- Fill the cooling system. Refer to
Cooling System Draining and Filling
.
- Inspect for leaks.