GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Lumina 🢒 Restraints 🢒 SIR 🢒 Knee Bolster Bracket Replacement

Removal Procedure
  1. Remove the instrument panel (IP) steering column opening filler panel. Refer to Steering Column Opening Filler Replacement .

    2. Object Number: 292810 Size: SH
  2. Remove the IP driver knee bolster inner bracket bolts (2).
  3. Remove the IP driver knee bolster (3).

Installation Procedure

    Object Number: 292810 Size: SH
  1. Install the instrument panel (IP) driver knee bolster (3) to the IP.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the IP driver knee bolster inner bracket bolts (2).

    3. Tighten
    Tighten the IP driver knee bolster inner bracket bolts (2) to 1.9 N·m (17 lb in).

  3. Install the IP steering column opening filler panel. Refer to Steering Column Opening Filler Replacement .