GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Lumina 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Daytime Running Lights (DRL) Control Module Replacement

Removal Procedure

    Object Number: 182444 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
  2. Remove the LH instrument panel (IP) insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.
  3. Slide the daytime running lamp (DRL) module upward to release the module tabs from the retaining slots on the BCM bracket; reposition the module.
  4. Disconnect the electrical connectors from the DRL module and remove the module.

Installation Procedure

    Object Number: 182444 Size: SH
  1. Connect the electrical connectors to the DRL module.
  2. Position the DRL module to the BCM bracket, then slide the module downward to secure the module tabs into the retaining slots on the bracket.
  3. Install the LH IP insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.