Removal Procedure
- Remove the seat belt buckle
bolt plug (5) from the sleeve.
- Disconnect the following components when removing the left front
seat belt buckle (6) :
| • | The electrical connector (2) |
- Remove the left front seat belt buckle bolt.
- Remove the left front seat belt buckle (6) from the vehicle.
Installation Procedure
- Install the left front
seat belt buckle (6) to the vehicle.
- Install the left front seat belt buckle (6) through the hole in
the seat cushion on the split bench seat.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the left
front seat belt buckle bolt (4).
Tighten
Tighten the left front seat belt buckle bolt to 42 N·m
(31 lb ft).
- Connect the following components if the components are disconnected:
| • | The electrical connector (2) |
| • | Insert the connector under the carpet. |
- Install the left front seat belt buckle bolt plug
(5) to the sleeve.
