Fastener Tightening Specifications | Specification | |
---|---|---|
Metric | English | |
Air Inlet Grille Screw | 1.5 N·m | 13 lb in |
Fender Liner to Front Bumper Fascia Bolts | 2.8 N·m | 24 lb in |
Fender Liner to Lower Outboard Bolts | 1.3 N·m | 12 lb in |
Fender Liner Nut | 2.8 N·m | 24 lb in |
Fender Lower Bolts | 6 N·m | 53 lb in |
Fender Upper Bolts | 25 N·m | 18 lb ft |
Front End Sheet Metal Diagonal Brace Front Bolt | 25 N·m | 18 lb ft |
Front End Sheet Metal Diagonal Brace Rear Bolt | 47 N·m | 35 lb ft |
Hood Hinge to Fender Bolts | 25 N·m | 18 lb ft |
Hood Hinge to Hood Bolts | 25 N·m | 18 lb ft |
Hood Latch Bolts | 10 N·m | 89 lb in |
Hood Latch Support Bolts | 25 N·m | 18 lb ft |
Hood Latch Support Nut | 10 N·m | 89 lb in |
Hood Release Handle Lower Bolts | 2 N·m | 18 lb in |
Hood Release Handle Upper Bolts | 2 N·m | 18 lb in |
Plenum Chamber Water Deflector Screw | 4.5 N·m | 40 lb in |