Step
| Action
| Value(s)
| Yes
| No
|
1
| Use a test light in order to backprobe between the inoperative
door lock switch terminal B and the ground.
Does the test light illuminate?
| --
| Go to
Step 2
| Go to
Step 3
|
2
|
- Inspect for a poor connection at the inoperative door lock switch
and C301 left or C302 right.
- If the connection is OK, replace the inoperative door lock switch.
Is the repair complete?
| --
| Go to
Step 4
| --
|
3
|
- Inspect C301 left or C302 right for a poor connection.
- If the connection is OK, repair the poor connection or an open
in CKT 1140 between the inoperative door lock switch and S306.
Is the repair complete?
| --
| Go to
Step 4
| --
|
4
|
- Ensure that the ignition switch is in the LOCK position.
- Reconnect any connectors/components removed.
Have all repairs been made?
| --
| Go to
Power Door Locks System Check
| --
|
