Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Use a test light in order to backprobe between the inoperative
door lock switch terminal A and the ground.
- While observing the test light press the inoperative door lock
switch to the UNLOCK position.
Does the test light illuminate?
| --
| Go to
Step
2
| Go to
Step 3
|
2
| Repair a poor connection or an open in circuit 194 between the
inoperative door lock switch and S312.
Is the repair complete?
| --
| Go to
Step
4
| --
|
3
|
- Check for a poor connection at the inoperative door lock switch.
- If connection is OK, then replace the inoperative door lock switch.
Is the repair complete?
| --
| Go to
Step
4
| --
|
4
|
- Make sure the ignition switch is in the LOCK position.
- Reconnect any connectors/components removed.
Have all repairs been made?
| --
| Go to
Power Door Locks System Check
| --
|
