GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Lumina 🢒 Body and Accessories 🢒 Seats 🢒 Quarter Upper Trim Panel Replacement

Removal Procedure

    Object Number: 319861 Size: SH
  1. Remove the screw from the quarter upper trim panel.
  2. Pull down and remove the trim from the clips on the pinch-rail.
  3. Remove the trim panel.

Installation Procedure

    Object Number: 319861 Size: SH
  1. Position the panel on the rear quarter.
  2. Install the quarter upper trim by engaging the push-in clips on the pinch-rail.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screw.

    4. Tighten
    Tighten the rear quarter upper trim screw to 2 N·m (18 lb in).