GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Lumina 🢒 Body and Accessories 🢒 Seats 🢒 Front Seat Trim Panel Replacement

Removal Procedure

    Object Number: 291685 Size: SH
  1. Remove the finish panel screws (4) on the left seat.
  2. Disconnect the electrical connector, if equipped.

    3. Object Number: 291687 Size: SH
  3. Remove the finish panel screws (2) on the right seat.
  4. Remove the finish panel.

Installation Procedure

    Object Number: 291687 Size: SH
  1. Install the finish panel.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the finish panel screws (2) on the right seat

    3. Tighten
    Tighten the finish panel screws to 3 N·m (27 lb in).

  3. Connect the electrical connector, if equipped.

    4. Object Number: 291685 Size: SH
  4. Install the finish panel screws (4) on the left seat

    5. Tighten
    Tighten the finish panel screws to 3 N·m (27 lb in).