GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Lumina 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lid Ajar Indicator Switch Replacement

Removal Procedure
  1. Open the rear compartment.

    2. Object Number: 291975 Size: SH
  2. Remove the indicator switch bolt (9).
  3. Remove the rear compartment lid ajar indicator switch (1) from the lock (3).
  4. Remove the clip (4) from the inner panel.
  5. Disconnect the electrical connector (5).

Installation Procedure

    Object Number: 291975 Size: SH
  1. Connect the electrical connector (5).
  2. Attach the clip (4) to the inner panel.
  3. Install the rear compartment lid ajar indicator switch (1) to the lock (3).

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the indicator switch bolt (9).

    5. Tighten
    Tighten the indicator switch bolt to 2.5 N·m (22 lb in).

  5. Close the rear compartment.