GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Lumina 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lid Wiring Harness Replacement

Removal Procedure
  1. Open the rear compartment.

    2. Object Number: 324449 Size: SH
  2. Disconnect all of the electrical components that are attached to the harness.
  3. Tie a string to the rear compartment lid wire harness. Pull the harness out of the rear compartment lid. Ensure that the string is long enough to be disconnected from the old harness and connected to it replacement.
  4. Disconnect the harness connector located behind the right, rear compartment trim panel.
  5. Remove the harness.

Installation Procedure
  1. Connect the harness connector behind the right, rear compartment trim panel.
  2. Connect the new harness to the string in the rear compartment lid.
  3. Pull the string through the rear compartment lid until the harness is in position inside of the rear compartment lid. Remove the string.

    4. Object Number: 324449 Size: SH
  4. Connect the electrical harness to the electrical components.
  5. Close the rear compartment.