I/P PLASTIC SQUEAK NOISE FOAM PADS AT DIC OPENING

Model and Year: 1990 U VAN (APV)

Condition:

Plastic to plastic noise (squeak) in Instrument Panel Cluster area.

Cause:

Cluster housing contacts lens of cluster gage.

Correction:

Place four (4) foam pads on edge of (highest surface) of cluster opening. Care must be taken so foam is not visible from passenger side. Cut foam pads from 3M Scotchfoam Black Vinyl Foam Tape #06370 or equivalent. See Illustration.

Labor Operation Number: T1616

Labor Time: .3 Hours

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.