GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1996 🢒 Lumina APV 🢒 Engine 🢒 Engine Controls - 3.4L (VIN E) 🢒 Throttle Position Sensor Replacement

Removal Procedure
Object Number: 16239 Size: SH
  1. Remove the air inlet tube.
  2. Remove the TP sensor electrical connector.
  3. Remove the two TP sensor attaching screws.
  4. Remove the TP sensor.

Installation Procedure
Object Number: 16239 Size: SH
  1. With the throttle valve in the normal closed idle position, install the TP sensor on the throttle body assembly, making sure the TP sensor pickup lever is located ABOVE the tang on the throttle actuator lever.
  2. Install the two TP sensor attaching screws, using a thread-locking compound on the screws. Loctite® 262, GM Part No. 1052624, or equivalent should be used.
  3. Install the TP sensor electrical connector.

    4. Tighten
    Tighten the TP sensor attaching screws to 2.0 N·m (18  lb. in.)

  4. Install the air inlet tube.