GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Lumina Ute 🢒 Engine 🢒 Engine Electrical 🢒 Rear Wheelhouse Panel Liner Replacement

Removal Procedure

    Caution: Refer to Safety Glasses Caution in the Preface section.

    Caution: Refer to Vehicle Lifting Caution in the Preface section.

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the rear wheel. Refer to Tire and Wheel Removal and Installation.

    3. Object Number: 2008019 Size: SH
  3. Remove the rear wheelhouse liner to rear bumper fascia retaining scrivets (1).

    4. Object Number: 2008017 Size: SH
  4. Remove the rear wheelhouse liner to rocker moulding retaining screws (3).
  5. Remove the rear wheelhouse liner to vehicle push-in retainers (1).

    6. Important: Carefully pry the rear wheelhouse liner from the vehicle.

  6. Remove the rear wheelhouse liner (2) from the vehicle.

Installation Procedure

    Object Number: 2008017 Size: SH
  1. Position the rear wheelhouse liner (2) to the vehicle.
  2. Install the rear wheelhouse liner to vehicle body push-in retainers (1).

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the rear wheelhouse liner to rocker moulding retaining screws (3).

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).


    Object Number: 2008019 Size: SH
  4. Install the rear wheelhouse liner to rear bumper fascia retaining scrivets (1).
  5. Install the rear wheel. Refer to Tire and Wheel Removal and Installation.
  6. Lower the vehicle.