For 1990-2009 cars only
Removal Procedure
- Remove the transmission oil pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement.
- Remove the following parts: (89), (92), (88), (85) and (84)
- Remove the manual shaft seal (82) with a screwdriver.
Installation Procedure
- Inspect the following items:
- Install the following items:
- Install the transmission oil pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement.
| • | Manual shaft (84) for damage or burrs |
| • | Parking lock actuator assembly (85) for damage |
| • | Manual shift detent lever with shaft position switch assembly (88) for damage or cracks |
| • | Manual valve link (89) for damage |
| • | Manual shift detent lever pin (92) discard - Do NOT reuse. |
Caution: Refer to Fastener Caution in the Preface section.
| • | Manual shift detent lever with shaft position switch assembly (88) |
| • | Parking lock actuator assembly (85) |
| • | Manual shaft (84) (model dependent) |
| • | NEW manual shift detent lever pin (92) |
| • | Manual valve link (89) |
| • | Tighten the nut to 31 N·m (23 lb ft). |
