Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the battery ground cable. Refer to
Battery Negative Cable Disconnection and Connection.
Important: The headliner can be easily damaged or discoloured.
Use care when working in the area of the headliner.
- Open the sun glasses storage compartment (1)
to reveal the retaining screw (2).
- Remove the dome lamp assembly to roof retaining screw (2).
Important: Grasp the dome lamp assembly (4) and
pull downwards to remove the dome lamp assembly (4) from the headliner assembly (3).
- Remove the dome lamp assembly (4) from the headliner assembly (3).
- Disconnect the dome lamp assembly electrical connector (2).
- Disconnect the Bluetooth microphone electrical connector (1) if
fitted.
Installation Procedure
- Install the dome lamp assembly (3) to the vehicle.
- Connect the bluetooth microphone connector (1) if fitted.
- Connect the dome lamp assembly electrical connector (2).
- Insert the two locating arms (1) into the headlining
assembly (4).
- Push the dome lamp assembly (5) up into the headlining assembly (4).
- Install the dome lamp assembly to roof retaining screw (3).
Tighten
Tighten the screw to 2 N·m (18 lb in).
- Close the sun glasses storage compartment (2).
- Connect the battery ground cable. Refer to
Battery Negative Cable Disconnection and Connection.