GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Lumina Ute 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Body Lock Pillar Applique Replacement

Removal Procedure
  1. Remove the rear header trim. Refer to Roof Panel Rear Applique Replacement .

    2. Object Number: 2008476 Size: SH
  2. Remove the body lock pillar trim to body retaining screw (1).

    3. Object Number: 2008477 Size: SH

    Important: Pull the top of the body lock pillar trim (2) to disengage the retaining clip (1) and slide out the bottom of the body lock pillar trim (2) to disengage the retaining tangs (4).

  3. Remove the body lock pillar trim (2) from the body (3).

Installation Procedure

    Object Number: 2008477 Size: SH

    Important: Slide in the bottom of the body lock pillar trim (2) to engage the retaining tangs (4). Push in the top of the body lock pillar trim (2) to engage the retaining clip (1).

  1. Install the body lock pillar trim (2) to the body (3).

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 2008476 Size: SH
  2. Install the body lock pillar trim to body retaining screw (1).

    3. Tighten
    Tighten the screw to 2 N·m (18 lb ft).

  3. Install the rear header trim. Refer to Refer to Roof Panel Rear Applique Replacement .