Engine Controls Connector End Views. Chevrolet Lumina VE 2007

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2007 🢒 Lumina VE 🢒 Engine 🢒 Engine Controls and Fuel - 6.0L 🢒 Engine Controls Connector End Views

Engine Controls Connector End Views CSV HSV VXR8

Table 1:	A/C Refrigerant Pressure Sensor (LS2)
Table 2:	Accelerator Pedal Position (APP) Sensor (LY7/LS2)
Table 3:	Backup Lamp Switch (LS2)
Table 4:	Camshaft Position (CMP) Sensor (LS2)
Table 5:	Clutch Pedal Position (CPP) Switch
Table 6:	Clutch Start Switch
Table 7:	Crankshaft Position (CKP) Sensor (LS2)
Table 8:	Engine Coolant Temperature (ECT) Sensor (LS2)
Table 9:	Engine Oil Level/Temperature Sensor (LS2)
Table 10:	Engine Oil Pressure (EOP) Sensor (LS2)
Table 11:	Evaporative Emission (EVAP) Canister Purge Solenoid Valve (LS2)
Table 12:	Fuel Injector - 1 (LS2)
Table 13:	Fuel Injector - 2 (LS2)
Table 14:	Fuel Injector - 3 (LS2)
Table 15:	Fuel Injector - 4 (LS2)
Table 16:	Fuel Injector - 5 (LS2)
Table 17:	Fuel Injector - 6 (LS2)
Table 18:	Fuel Injector - 7 (LS2)
Table 19:	Fuel Injector - 8 (LS2)
Table 20:	Fuel Level Sensor - Secondary
Table 21:	Fuel Pump and Sender Assembly
Table 22:	Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 (LS2)
Table 23:	Heated Oxygen Sensor (HO2S) Bank 1 Sensor 2 (LS2)
Table 24:	Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1 (LS2)
Table 25:	Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2 (LS2)
Table 26:	Ignition Coil - 1 (LS2)
Table 27:	Ignition Coil - 2 (LS2)
Table 28:	Ignition Coil - 3 (LS2)
Table 29:	Ignition Coil - 4 (LS2)
Table 30:	Ignition Coil - 5 (LS2)
Table 31:	Ignition Coil - 6 (LS2)
Table 32:	Ignition Coil - 7 (LS2)
Table 33:	Ignition Coil - 8 (LS2)
Table 34:	Knock Sensor (KS) Left (LS2)
Table 35:	Knock Sensor (KS) Right (LS2)
Table 36:	Manifold Absolute Pressure (MAP) Sensor (LS2)
Table 37:	Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor (LY7/LS2)
Table 38:	Reverse Lockout Solenoid (LS2)
Table 39:	Throttle Body (LS2)

A/C Refrigerant Pressure Sensor (LS2)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
1	BN/D-GN	0.5	Low Reference
2	GY	0.5	5-Volt Reference
3	OG/BK	0.5	A/C Refrigerant Pressure Sensor Signal

Accelerator Pedal Position (APP) Sensor (LY7/LS2)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
1	BN/YE	0.5	5-Volt Reference
2	WH/BK	0.5	5-Volt Reference
3	BU/WH	0.5	APP Sensor 1 Signal
4	BN	0.5	Low Reference
5	PU	0.5	Low Reference
6	L-BU	0.5	APP Sensor 2 Signal

Backup Lamp Switch (LS2)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	L-GN	0.5	Backup Lamp Switch Signal
B	BK	0.5	Ground

Camshaft Position (CMP) Sensor (LS2)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	OG	0.5	5-Volt Reference
B	PK/BK	0.5	Low Reference
C	BN/WH	0.5	CMP Sensor Signal

Clutch Pedal Position (CPP) Switch


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	BN/WH	0.5	CPP Switch Signal
B	PK	0.5	Ignition 1 Voltage

Clutch Start Switch


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	D-GN	0.5	CPP Switch Signal
B	BK	0.5	Ground

Crankshaft Position (CKP) Sensor (LS2)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	D-BU/WH	0.5	CKP Sensor Signal
B	YE/BK	0.5	Low Reference
C	L-GN	0.5	5-Volt Reference

Engine Coolant Temperature (ECT) Sensor (LS2)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	BN/WH	0.5	Low Reference
B	YE/D-GN	0.5	ECT Sensor Signal

Engine Oil Level/Temperature Sensor (LS2)


Connector Part Information		GT 150 Sealed 4.5
Pin	Wire Colour	Wire Size	Function
A	BN	0.5	Oil Level Switch Signal
B	YE	0.5	Oil Temperature Sensor Signal
C	BN/RD	0.5	Low Reference

Engine Oil Pressure (EOP) Sensor (LS2)


Connector Part Information		GT 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
1	BK	0.5	Low Reference
2	GY	0.5	5-Volt Reference
3	BN/WH	0.5	Oil Pressure Sensor Signal

Evaporative Emission (EVAP) Canister Purge Solenoid Valve (LS2)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	PK/BU	0.75	Ignition 1 Voltage
B	D-GN/WH	0.75	EVAP Canister Purge Solenoid Control

Fuel Injector - 1 (LS2)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	PK/BU	0.75	Ignition 1 Voltage
B	BN/BK	0.75	Fuel Injector 1 Control

Fuel Injector - 2 (LS2)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	PK	0.75	Ignition 1 Voltage
B	L-GN/BK	0.75	Fuel Injector 2 Control

Fuel Injector - 3 (LS2)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	PK/BU	0.75	Ignition 1 Voltage
B	PK/BK	0.75	Fuel Injector 3 Control

Fuel Injector - 4 (LS2)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	PK	0.75	Ignition 1 Voltage
B	L-BU/BK	0.75	Fuel Injector 4 Control

Fuel Injector - 5 (LS2)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	PK/BU	0.75	Ignition 1 Voltage
B	BN/WH	0.75	Fuel Injector 5 Control

Fuel Injector - 6 (LS2)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	PK	0.75	Ignition 1 Voltage
B	YE/BK	0.75	Fuel Injector 6 Control

Fuel Injector - 7 (LS2)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	PK/BU	0.75	Ignition 1 Voltage
B	OG/BK	0.75	Fuel Injector 7 Control

Fuel Injector - 8 (LS2)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	PK	0.75	Ignition 1 Voltage
B	D-BU/WH	0.75	Fuel Injector 8 Control

Fuel Level Sensor - Secondary


Connector Part Information
Pin	Wire Colour	Wire Size	Function
Z-1	BN/YE	0.3	Fuel Level Signal Signal (Secondary)
Z-2	L-BU	0.5	Low Reference
Z-3	--	--	--
Z-4	--	--	--
Z-5	--	--	--

Fuel Pump and Sender Assembly


Connector Part Information
Pin	Wire Colour	Wire Size	Function
Z1	GY	2.0	Fuel Pump Supply Voltage
Z2	PU	0.5	Fuel Level Sensor Signal (Primary)
Z3	BK	2.0	Ground
Z4	BN/YE	0.5	Low Reference
Z5	--	--	--

Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 (LS2)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	BN/RD	0.5	HO2S Low Signal (Bank 1 Sensor 1)
B	PU/WH	0.5	HO2S High Signal (Bank 1 Sensor 1)
C	GY/WH	0.5	HO2S Heater Low Control (Bank 1 Sensor 1)
D	PK/BK	0.5	Ignition 1 Voltage

Heated Oxygen Sensor (HO2S) Bank 1 Sensor 2 (LS2)


Connector Part Information		Metri-Pack 150 Sealed
Pin	Wire Colour	Wire Size	Function
A	BN/WH	0.5	HO2S Low Signal (Bank 1 Sensor 2)
B	PU/WH	0.5	HO2S High Signal (Bank 1 Sensor 2)
C	BN	0.5	HO2S Heater Low Control (Bank 1 Sensor 2)
D	PK/D-BU	0.75	Ignition 1 Voltage

Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1 (LS2)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	BN/RD	0.5	HO2S Low Signal (Bank 2 Sensor 1)
B	PU	0.5	HO2S High Signal (Bank 2 Sensor 1)
C	L-GN	0.5	HO2S Heater Low Control (Bank 2 Sensor 1)
D	PK/BK	0.5	Ignition 1 Voltage

Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2 (LS2)


Connector Part Information		Metri-Pack 150 Sealed
Pin	Wire Colour	Wire Size	Function
A	BN/WH	0.5	HO2S Low Signal (Bank 2 Sensor 2)
B	PU	0.5	HO2S High Signal (Bank 2 Sensor 2)
C	OG/WH	0.5	HO2S Heater Low Control (Bank 2 Sensor 2)
D	PK/D-BU	0.75	Battery 1 Voltage

Ignition Coil - 1 (LS2)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BK	0.85	Ground
B	BN	0.85	Low Reference
C	PU	0.8	IC 1 Control
D	PK/BK	0.85	Ignition 1 Voltage

Ignition Coil - 2 (LS2)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BK	0.85	Ground
B	BN/WH	0.85	Low Reference
C	OG/WH	0.5	IC 2 Control
D	PK/BK	0.85	Ignition 1 Voltage

Ignition Coil - 3 (LS2)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BK	0.85	Ground
B	BN	0.85	Low Reference
C	L-BU	0.8	IC 3 Control
D	PK/BK	0.85	Ignition 1 Voltage

Ignition Coil - 4 (LS2)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BK	0.85	Ground
B	BN/WH	0.85	Low Reference
C	D-GN/WH	0.5	IC 4 Control
D	PK/BK	0.85	Ignition 1 Voltage

Ignition Coil - 5 (LS2)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BK	0.85	Ground
B	BN	0.85	Low Reference
C	D-GN	0.8	IC 5 Control
D	PK/BK	0.85	Ignition 1 Voltage

Ignition Coil - 6 (LS2)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BK	0.85	Ground
B	BN/WH	0.85	Low Reference
C	L-BU/WH	0.5	Left Front Door Open Switch Signal
D	PK/BK	0.85	Ignition 1 Voltage

Ignition Coil - 7 (LS2)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BK	0.85	Ground
B	BN	0.85	Low Reference
C	OG	0.8	IC 7 Control
D	PK/BK	0.85	Ignition 1 Voltage

Ignition Coil - 8 (LS2)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BK	0.85	Ground
B	BN/WH	0.85	Low Reference
C	PU/WH	0.5	IC 8 Control
D	PK/BK	0.85	Ignition 1 Voltage

Knock Sensor (KS) Left (LS2)


Connector Part Information		GT 150 Sealed
Pin	Wire Colour	Wire Size	Function
1	D-BU	0.5	Knock Sensor 1 Signal
2	GY	0.5	Low Reference Knock Sensor Signal Return

Knock Sensor (KS) Right (LS2)


Connector Part Information		GT 150 Sealed
Pin	Wire Colour	Wire Size	Function
1	L-BU	0.5	Knock Sensor 2 Signal
2	TN	0.5	Low Reference Knock Sensor Signal Return

Manifold Absolute Pressure (MAP) Sensor (LS2)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	OG/BK	0.5	Low Reference
B	L-GN	0.5	MAP Sensor Signal
C	GY	0.5	5-Volt Reference

Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor (LY7/LS2)


Connector Part Information		GT 150 Sealed 4.0
Pin	Wire Colour	Wire Size	Function
A	YE	0.5	MAF Sensor Signal
B	PK	0.5	Ignition 1 Voltage
C	BK	0.5	Ground
D	BN/RD	0.5	IAT Sensor Signal
E	BN/WH	0.5	Low Reference

Reverse Lockout Solenoid (LS2)


Connector Part Information		Metri-Pack 150 Sealed
Pin	Wire Colour	Wire Size	Function
A	L-GN	07.5	Reverse Lockout Solenoid Control
B	PK/BK	0.75	RAP [X] Fuse Supply Voltage

Throttle Body (LS2)


Connector Part Information		GT 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BN	0.75	TAC Motor Control - 2
B	YE	0.75	TAC Motor Control - 1
C	BN/BK	0.5	Low Reference
D	D-GN	0.5	TP Sensor 1 Signal
E	GY	0.5	5-Volt Reference
F	PU	0.5	TP Sensor 2 Signal

Engine Controls Connector End Views LWB SWB

Table 1:	A/C Refrigerant Pressure Sensor (L98)
Table 2:	Accelerator Pedal Position (APP) Sensor (LY7/L98)
Table 3:	Backup Lamp Switch (L98)
Table 4:	Camshaft Position (CMP) Sensor (L98)
Table 5:	Clutch Cruise Switch
Table 6:	Clutch Safety Switch
Table 7:	Crankshaft Position (CKP) Sensor (L98)
Table 8:	Engine Coolant Temperature (ECT) Sensor (L98)
Table 9:	Engine Oil Level/Temperature Sensor (L98)
Table 10:	Engine Oil Pressure (EOP) Sensor (L98)
Table 11:	Evaporative Emission (EVAP) Canister Purge Solenoid Valve (L98)
Table 12:	Fuel Injector - 1 (L98)
Table 13:	Fuel Injector - 2 (L98)
Table 14:	Fuel Injector - 3 (L98)
Table 15:	Fuel Injector - 4 (L98)
Table 16:	Fuel Injector - 5 (L98)
Table 17:	Fuel Injector - 6 (L98)
Table 18:	Fuel Injector - 7 (L98)
Table 19:	Fuel Injector - 8 (L98)
Table 20:	Fuel Level Sensor - Secondary
Table 21:	Fuel Pump and Sender Assembly
Table 22:	Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 (L98)
Table 23:	Heated Oxygen Sensor (HO2S) Bank 1 Sensor 2 (L98)
Table 24:	Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1 (L98)
Table 25:	Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2 (L98)
Table 26:	Ignition Coil - 1 (L98)
Table 27:	Ignition Coil - 2 (L98)
Table 28:	Ignition Coil - 3 (L98)
Table 29:	Ignition Coil - 4 (L98)
Table 30:	Ignition Coil - 5 (L98)
Table 31:	Ignition Coil - 6 (L98)
Table 32:	Ignition Coil - 7 (L98)
Table 33:	Ignition Coil - 8 (L98)
Table 34:	Knock Sensor (KS) Left (L98)
Table 35:	Knock Sensor (KS) Right (L98)
Table 36:	Manifold Absolute Pressure (MAP) Sensor (L98)
Table 37:	Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor (LY7/L98)
Table 38:	Reverse Lockout Solenoid (L98)
Table 39:	Throttle Body (L98)

A/C Refrigerant Pressure Sensor (L98)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
1	BN/D-GN	0.5	Low Reference
2	GY	0.5	5-Volt Reference
3	OG/BK	0.5	A/C Refrigerant Pressure Sensor Signal

Accelerator Pedal Position (APP) Sensor (LY7/L98)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
1	BN/YE	0.5	5-Volt Reference
2	WH/BK	0.5	5-Volt Reference
3	BU/WH	0.5	APP Sensor 1 Signal
4	BN	0.5	Low Reference
5	PU	0.5	Low Reference
6	L-BU	0.5	APP Sensor 2 Signal

Backup Lamp Switch (L98)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	L-GN	0.5	Backup Lamp Switch Signal
B	BK	0.5	Ground

Camshaft Position (CMP) Sensor (L98)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	OG	0.5	5-Volt Reference
B	PK/BK	0.5	Low Reference
C	BN/WH	0.5	CMP Sensor Signal

Clutch Cruise Switch


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	BN/WH	0.5	Clutch Disable Clutch SW Signal
B	PK	0.5	Ignition 1 Voltage

Clutch Safety Switch


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	D-GN	0.5	Clutch Start/Neutral Start
B	BK	0.5	Ground

Crankshaft Position (CKP) Sensor (L98)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	D-BU/WH	0.5	CKP Sensor Signal
B	YE/BK	0.5	Low Reference
C	L-GN	0.5	5-Volt Reference

Engine Coolant Temperature (ECT) Sensor (L98)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	BN/WH	0.5	Low Reference
B	YE/D-GN	0.5	ECT Sensor Signal

Engine Oil Level/Temperature Sensor (L98)


Connector Part Information		GT 150 Sealed 4.5
Pin	Wire Colour	Wire Size	Function
A	BN	0.5	Oil Level Switch Signal
B	D-GN/YE	0.5	Oil Temperature Sensor Signal
C	BN/RD	0.5	Low Reference

Engine Oil Pressure (EOP) Sensor (L98)


Connector Part Information		GT 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
1	BK	0.5	Low Reference
2	GY	0.5	5-Volt Reference
3	BN/WH	0.5	Oil Pressure Sensor Signal

Evaporative Emission (EVAP) Canister Purge Solenoid Valve (L98)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	PK/BU	0.75	Ignition 1 Voltage
B	D-GN/WH	0.75	EVAP Canister Purge Solenoid Control

Fuel Injector - 1 (L98)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	PK/BU	0.75	Ignition 1 Voltage
B	BN/BK	0.75	Fuel Injector 1 Control

Fuel Injector - 2 (L98)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	PK	0.75	Ignition 1 Voltage
B	L-GN/BK	0.75	Fuel Injector 2 Control

Fuel Injector - 3 (L98)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	PK/BU	0.75	Ignition 1 Voltage
B	PK/BK	0.75	Fuel Injector 3 Control

Fuel Injector - 4 (L98)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	PK	0.75	Ignition 1 Voltage
B	L-BU/BK	0.75	Fuel Injector 4 Control

Fuel Injector - 5 (L98)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	PK/BU	0.75	Ignition 1 Voltage
B	BN/WH	0.75	Fuel Injector 5 Control

Fuel Injector - 6 (L98)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	PK	0.75	Ignition 1 Voltage
B	YE/BK	0.75	Fuel Injector 6 Control

Fuel Injector - 7 (L98)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	PK/BU	0.75	Ignition 1 Voltage
B	OG/BK	0.75	Fuel Injector 7 Control

Fuel Injector - 8 (L98)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	PK	0.75	Ignition 1 Voltage
B	D-BU/WH	0.75	Fuel Injector 8 Control

Fuel Level Sensor - Secondary


Connector Part Information
Pin	Wire Colour	Wire Size	Function
1	BN/YE	0.3	Fuel Return
2	L-BU	0.5	Fuel Level
3	--	--	Not Used
4	--	--	Not Used
5	--	--	Not Used

Fuel Pump and Sender Assembly


Connector Part Information
Pin	Wire Colour	Wire Size	Function
1	GY	2.0	Fuel Pump Supply Voltage
2	PU	0.5	Fuel Level Sensor Signal (Primary)
3	BK	2.0	Ground
4	BN/YE	0.5	Low Reference
5	--	--	Not Used

Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 (L98)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	BN/RD	0.5	HO2S Low Signal (Bank 1 Sensor 1)
B	PU/WH	0.5	HO2S High Signal (Bank 1 Sensor 1)
C	GY/WH	0.5	HO2S Heater Low Control (Bank 1 Sensor 1)
D	PK/BK	0.8	Ignition 1 Voltage

Heated Oxygen Sensor (HO2S) Bank 1 Sensor 2 (L98)


Connector Part Information		Metri-Pack 150 Sealed
Pin	Wire Colour	Wire Size	Function
A	BN/WH	0.5	HO2S Low Signal (Bank 1 Sensor 2)
B	PU/WH	0.5	HO2S High Signal (Bank 1 Sensor 2)
C	BN	0.5	HO2S Heater Low Control (Bank 1 Sensor 2)
D	PK/D-BU	0.75	Ignition 1 Voltage

Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1 (L98)


Connector Part Information
Pin	Wire Colour	Wire Size	Function
A	BN/RD	0.5	HO2S Low Signal (Bank 2 Sensor 1)
B	PU	0.5	HO2S High Signal (Bank 2 Sensor 1)
C	L-GN	0.5	HO2S Heater Low Control (Bank 2 Sensor 1)
D	PK/BK	0.8	Ignition 1 Voltage

Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2 (L98)


Connector Part Information		Metri-Pack 150 Sealed
Pin	Wire Colour	Wire Size	Function
A	BN/WH	0.5	HO2S Low Signal (Bank 2 Sensor 2)
B	PU	0.5	HO2S High Signal (Bank 2 Sensor 2)
C	OG/WH	0.5	HO2S Heater Low Control (Bank 2 Sensor 2)
D	PK/D-BU	0.75	Ignition 1 Voltage

Ignition Coil - 1 (L98)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BK	0.85	Ground
B	BN	0.85	Low Reference
C	PU	0.8	IC 1 Control
D	PK/BK	0.85	Ignition 1 Voltage

Ignition Coil - 2 (L98)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BK	0.85	Ground
B	BN/WH	0.85	Low Reference
C	OG/WH	0.5	IC 2 Control
D	PK/BK	0.85	Ignition 1 Voltage

Ignition Coil - 3 (L98)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BK	0.85	Ground
B	BN	0.85	Low Reference
C	L-BU	0.8	IC 3 Control
D	PK/BK	0.85	Ignition 1 Voltage

Ignition Coil - 4 (L98)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BK	0.85	Ground
B	BN/WH	0.85	Low Reference
C	D-GN/WH	0.5	IC 4 Control
D	PK/BK	0.85	Ignition 1 Voltage

Ignition Coil - 5 (L98)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BK	0.85	Ground
B	BN	0.85	Low Reference
C	D-GN	0.8	IC 5 Control
D	PK/BK	0.85	Ignition 1 Voltage

Ignition Coil - 6 (L98)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BK	0.85	Ground
B	BN/WH	0.85	Low Reference
C	L-BU/WH	0.5	IC 6 Control
D	PK/BK	0.85	Ignition 1 Voltage

Ignition Coil - 7 (L98)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BK	0.85	Ground
B	BN	0.85	Low Reference
C	OG	0.8	IC 7 Control
D	PK/BK	0.85	Ignition 1 Voltage

Ignition Coil - 8 (L98)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BK	0.85	Ground
B	BN/WH	0.85	Low Reference
C	PU/WH	0.5	IC 8 Control
D	PK/BK	0.85	Ignition 1 Voltage

Knock Sensor (KS) Left (L98)


Connector Part Information		GT 150 Sealed
Pin	Wire Colour	Wire Size	Function
1	D-BU	0.5	Knock Sensor 1 Signal
2	GY	0.5	Low Reference Knock Sensor Signal Return

Knock Sensor (KS) Right (L98)


Connector Part Information		GT 150 Sealed
Pin	Wire Colour	Wire Size	Function
1	L-BU	0.5	Knock Sensor 2 Signal
2	TN	0.5	Low Reference Knock Sensor Signal Return

Manifold Absolute Pressure (MAP) Sensor (L98)


Connector Part Information		Metri-Pack 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	OG/BK	0.5	Low Reference
B	L-GN	0.5	MAP Sensor Signal
C	GY	0.5	5-Volt Reference

Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor (LY7/L98)


Connector Part Information		GT 150 Sealed 4.0
Pin	Wire Colour	Wire Size	Function
A	YE	0.5	MAF Sensor Signal
B	PK	0.5	Ignition 1 Voltage
C	BK	0.5	Ground
D	BN/RD	0.5	IAT Sensor Signal
E	BN/WH	0.5	Low Reference

Reverse Lockout Solenoid (L98)


Connector Part Information		Metri-Pack 150 Sealed
Pin	Wire Colour	Wire Size	Function
A	L-GN	0.75	Reverse Lockout Solenoid Control
B	PK/BK	0.75	Reverse Lockout Solenoid Battery Power

Throttle Body (L98)


Connector Part Information		GT 150 Series, Sealed
Pin	Wire Colour	Wire Size	Function
A	BN	0.75	TAC Motor Control - 2
B	YE	0.75	TAC Motor Control - 1
C	BN/BK	0.5	Low Reference
D	D-GN	0.5	TP Sensor 1 Signal
E	GY	0.5	5-Volt Reference
F	PU	0.5	TP Sensor 2 Signal