Important: Make sure all mating surfaces are clean and
free of grease.
- Using a water sealant install the water pump and gasket to front engine cover.
- Make sure all retaining bolts are clean and free of debris.
- Install the water pump (1) and NEW gasket (2).
Notice: Refer to Fastener Notice in the Preface section.
- Install the water pump to engine front cover retaining bolts (3).
Tighten
Tighten the bolts to 10 N·m (89 lb in).
- Install the water pump pulley (2) to the water
pump (3)
- Install the water pump pulley to water pump retaining bolts (1).
Tighten
Tighten the bolts to 10 N·m (89 lb in).