For 1990-2009 cars only
- Install and correctly route the drive belt (1) around the following:
- Using a ½" drive breaker bar or ratchet, rotate the drive belt tensioner (2) clockwise.
- Install the drive belt to the crankshaft pulley (3).
- Slowly release the drive belt tensioner (2).
- Remove the ½" drive breaker bar or ratchet from the drive belt tensioner (2).
| • | Water pump pulley |
| • | Alternator |
| • | Drive belt tensioner |
| • | Crankshaft balancer |
| • | Air conditioning compressor |
| • | Idler pulley |
| • | Power steering pump |
Important: Make sure the drive belt (1) is correctly aligned and seated into the grooves of the accessory drive pulleys.
