Notice: Refer to Fastener Notice in the Preface section.
- Install thermostat housing to cylinder block retaining bolts (4) ensuring
a new block gasket (1) and rubber grommets (3) has been fitted.
Tighten
Tighten the bolts to 10 N·m (89 lb in).
- Install the heater pipe assembly to thermostat
housing retaining bolts (5) ensuring new O-ring seals (6) have been fitted.
Tighten
Tighten the bolts to 10 N·m (89 lb in).
- Install the heater pipe assembly (4) to cylinder head (2)
retaining bolt (3).
Tighten
Tighten the bolts to 35 N·m (26 lb ft).