- Remove the oil pump screen and tube assembly to oil
pump retaining bolt (1).
- Remove the oil pump screen and tube assembly to crankshaft oil deflector
retaining nut (4).
- Remove the oil pump screen and tube assembly (3) from the oil pump (2).
Important: The oil pump screen and tube assembly O-ring
seal (1) is a single use only component and must be replaced whenever the oil
pump screen and tube assembly (2) is removed.
- Remove the oil pump screen and tube assembly O-ring seal (1) from the
oil pump screen and tube assembly (2).
Discard the oil pump screen
and tube assembly O-ring seal (1).
- Remove the remaining crankshaft oil deflector
retaining nuts (2).
- Remove the crankshaft oil deflector (1).
- Remove the oil pump bolt (1).
Important: Do not allow dirt or debris to enter the
oil pump, cap the ends as necessary.
- Remove the oil pump (2).
- Clean and inspect the oil pump. Refer to
Oil Pump Cleaning and Inspection.