Removal Procedure
- Turn the infotainment system OFF.
- Remove the left hand side rear quarter upper trim panel. Refer to
Quarter Upper Trim Panel Replacement.
- Disconnect the rear glass electrical connector (1).
- Disconnect the diversity antenna amplifier module connector (4).
- Remove the diversity antenna module to upper body bolt (2).
- Remove the diversity antenna module (3) from the rear upper quarter
panel.
Installation Procedure
- Install the diversity antenna module (3) to
the rear upper quarter.
Notice: Refer to Fastener Notice in the Preface section.
- Install the diversity antenna module to rear upper quarter panel retaining bolt (2).
Tighten
Tighten the bolt to 10 N·m (89 lb in).
- Connect the diversity antenna amplifier module connector (4).
- Connect the rear glass electrical connector (1).
- Install the left hand side rear quarter upper trim panel. Refer to
Quarter Upper Trim Panel Replacement.
- If re-programming is required. Refer to
Control Module References.