- Remove the rear dome lamp assembly. Refer to
Dome Lamp Replacement.
- Remove the DVD player surround to roof panel screw (2).
Important: Using a suitable tool disengage the retainers (1).
- Remove the DVD player surround (2) from the headlining trim (3).
Installation Procedure
Important: Make sure all the retainers (1) engage
through the headlining trim (3).
- Install the DVD player surround (2) to the headlining trim (3).
Notice: Refer to Fastener Notice in the Preface section.
- Install the DVD player surround to roof panel retaining screw (2).
Tighten
Tighten the screws to 1 N·m (9 lb in).
- Install the rear dome lamp assembly. Refer to
Dome Lamp Replacement.