Removal Procedure
- Remove the headlining trim assembly. Refer
to
Headlining Trim Panel Replacement
.
- Remove the antenna module ground point to roof panel retaining bolt (2).
- Remove the antenna module to roof panel retaining bolt (3).
- Remove the retaining clip (1) securing the antenna module to the
roof.
- Disconnect the electrical connectors.
- From outside the vehicle, remove the antenna module and harness from the
vehicle.
Installation Procedure
- From outside the vehicle, install the antenna
module and harness to the vehicle threading the harness through the cavity.
- Connect the electrical connector.
- Install the retaining clip (1) securing the antenna module to the
roof.
Notice: Refer to Fastener Notice in the Preface section.
- Install the antenna module to roof panel retaining bolt (3).
Tighten
Tighten the bolt to 4 N·m (35 lb in).
Notice: Refer to Fastener Notice in the Preface section.
- Install the antenna module ground point to roof panel retaining bolt (2).
Tighten
Tighten the bolt to 2 N·m (18 lb in).
- Install the headlining trim assembly. Refer to
Headlining Trim Panel Replacement