GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Lumina VE 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Front Floor Console Cup Holder Replacement

Removal Procedure
  1. Remove the centre console trim plate. Refer to Console Trim Plate Replacement .

    2. Object Number: 1943710 Size: SH
  2. Using a suitable tool carefully remove cupholder trim (1) by disengaging the retaining clips.

    3. Object Number: 1962718 Size: SH
  3. Remove the cupholder mat (1) located at the base of the cupholder.

    4. Object Number: 1957036 Size: SH
  4. Remove the cupholder (4) retaining screws (1).
  5. Remove the cupholder (4) from the centre console (3) by releasing the retaining lug (2) and lifting upwards.

Installation Procedure

    Object Number: 1957036 Size: SH
  1. Install the cupholder (4) into the centre console (3) listen for an audible click from the retaining lug (2) to confirm fitting.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the cupholder to centre console retaining screws (1).

    3. Tighten
    Tighten the screws (1) to 2  N·m (18 lb in).


    Object Number: 1962718 Size: SH
  3. Install the cupholder mat (1).

    4. Object Number: 1943710 Size: SH
  4. Install the cup holder trim (1) by firmly engaging the retaining clips.
  5. Install the centre console trim plate. Refer to Console Trim Plate Replacement .