Removal Procedure
- Remove the instrument panel (I/P) upper trim pad. Refer to
Instrument Panel Upper Trim Pad Replacement
.
- Remove the air outlet duct to I/P upper trim pad retaining
screws (1).
- Remove the air outlet duct to I/P upper trim pad retaining
screws (1).
- Disengage the defroster duct to instrument panel (I/P)
upper trim pad retaining clips (2)
- Remove the defroster duct assembly (1) from the I/P upper trim
pad (3).
Installation Procedure
Important: Make sure the defroster duct to instrument
panel (I/P) upper trim pad retaining clips (2) are engaged to avoid an induced
rattle condition.
- Install the defroster duct assembly (1) to the instrument panel (I/P)
upper trim pad (3).
Notice: Refer to Fastener Notice in the Preface section.
- Install the air outlet duct to I/P upper trim pad retaining screws (1).
Tighten
Tighten the screws to 2 N·m(18lb in).
- Install the air outlet duct to I/P upper
trim pad retaining screws (1).
Tighten
Tighten the screws to 2 N·m(18lb in).
- Install the I/P upper trim pad. Refer to
Instrument Panel Upper Trim Pad Replacement
.