GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Lumina VE 🢒 Safety and Security 🢒 Seat Belts 🢒 Rear Seat Belt Replacement

Rear Seat Belt Replacement LHD

Removal Procedure
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement.
  2. Remove the rear seat back. Refer to Rear Seat Back Replacement.
  3. Remove the upper rear quarter trim panel. Refer to Quarter Upper Trim Panel Replacement.

    4. Object Number: 1959864 Size: SH
  4. Remove the bolt (1) attaching the seat belt lower anchor (2) to the vehicle

    5. Object Number: 1959882 Size: SH
  5. Remove the rear seat belt guide bolt assembly (1).

    6. Object Number: 1959883 Size: SH
  6. Remove the rear seat belt retractor bolt (2).
  7. Lift the retractor (1) in a upwards direction and tilt on a 30 degree angle making sure that the locking tab is clear

Installation Procedure

    Object Number: 1959883 Size: SH
  1. Replace the rear seat belt retractor assembly (1) and rear seat belt retractor bolt (2) .

    2. Tighten
    Tighten the intermediate bolt  (2) to 43 N·m (31 lb ft).


    Object Number: 1959882 Size: SH
  2. Replace the rear seat belt guide bolt assembly (1).

    3. Tighten
    Tighten the rear seat belt guide mounting bolt  (4) to 43 N·m (32 lb ft).

  3. Replace the upper rear quarter trim panel. Refer to Quarter Upper Trim Panel Replacement.

    4. Object Number: 1959864 Size: SH
  4. Replace the bolt (1) attaching the seat belt lower anchor (2) to the vehicle

    5. Important: Make Sure the seat belt lower anchor is parallel to vehicle centreline as shown.

    Tighten
    Tighten the seat belt lower anchor mounting bolt  (1) to 43 N·m (31 lb ft).

  5. Replace the rear seat cushion. Refer to Rear Seat Cushion Replacement.
  6. Replace the rear seat back. Refer to Rear Seat Back Replacement.

Rear Seat Belt Replacement RHD

Removal Procedure
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement.
  2. Remove the rear seat back. Refer to Rear Seat Back Replacement.
  3. Remove the upper rear quarter trim panel. Refer to Quarter Upper Trim Panel Replacement.

    4. Object Number: 1959864 Size: SH
  4. Remove the bolt (1) attaching the seat belt lower anchor (2) to the vehicle

    5. Object Number: 1959871 Size: SH
  5. Remove the rear seat belt guide bolt assembly (1).

    6. Object Number: 1959870 Size: SH
  6. Remove the rear seat belt retractor bolt (2).
  7. Lift the retractor (1) in a upwards direction and tilt on a 30 degree angle making sure that the locking tab is clear.

Installation Procedure

    Object Number: 1959870 Size: SH
  1. Replace the rear seat belt retractor assembly (1).
  2. Remove the rear seat belt retractor bolt (2) .

    3. Tighten
    Tighten the intermediate rear seat belt retractor mounting bolt  (2) to 43 N·m (31 lb ft).


    Object Number: 1959871 Size: SH
  3. Replace the rear seat belt guide bolt assembly (1).

    4. Tighten
    Tighten the rear seat belt guide mounting bolt  (4) to 43 N·m (32 lb ft).


    Object Number: 1959864 Size: SH
  4. Replace the bolt (1) attaching the seat belt lower anchor (2) to the vehicle

    5. Important: Make Sure the seat belt lower anchor is parallel to vehicle centreline as shown.

    Tighten
    Tighten the bolt  (1) to 43 N·m (31 lb ft).

  5. Replace the upper rear quarter trim panel. Refer to Quarter Upper Trim Panel Replacement.
  6. Replace the rear seat cushion. Refer to Rear Seat Cushion Replacement.
  7. Replace the rear seat back. Refer to Rear Seat Back Replacement.