Driver or Passenger Seat Head Restraint Replacement LWB

Important: This procedure will require the aid of an assistant.

1. Fully extend the head restraint (2), out of the head restraint guides (1).



2. Insert a suitable size probe into the hole in the left-hand restraint guide (1).
3. Depress the right-hand head restraint sleeve height adjuster lock (2).
4. With the aid of the assistant remove the head restraint out of the guides.

1. Locate the head restraint (1) in the head restraint guides (2).
2. Install the head restraint (2) by pushing it into the head restraint guides (1) listen for an audible click to confirm fitting.

Driver or Passenger Seat Head Restraint Replacement SWB

1. Remove the front seat head restraint. Refer to Front Seat Head Restraint Replacement.



2. Disengage the front head restraint cover J-strip by pulling the flap (1) back and out of flap (2) in the direction shown.
3. Pull out staples attaching cover side tabs.
4. Remove the front head restraint cover.

1. Install the head restraint cover.
2. Use staples to secure cover side tabs.
3. Engage the front head restraint cover J-strip by inter locking the flap (1) with flap (2) in the direction shown.
4. Install the front seat head restraint. Refer to Front Seat Head Restraint Replacement.