For 1990-2009 cars only
Removal Procedure
- Remove the seat cushion. Refer to Rear Seat Cushion Replacement.
- Remove the two retaining bolts (1) attaching the seat back to body panel.
- Remove the seat back out of the retaining slots (1).
- Remove the seat back.
Installation Procedure
- Install the seat back into the retaining slots.
- Install the two seat back retaining nuts (1).
- Install the seat cushion. Refer to Rear Seat Cushion Replacement.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the nuts to 27 N·m (20 lb ft).
