Note: Review the system operation in order to familiarize yourself with the system functions. Refer to
Object Detection Description and Operation.
Visual/Physical Inspection
• | Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom. |
• | Make sure the front object alarm sensors located on the vehicles front bumper are clear. Remove any snow, mud or ice that is blocking the sensors. |
• | Make sure the rear object alarm sensors located on the vehicles rear bumper are clear. Remove any snow, mud or ice that is blocking the sensors. |
• | If the vehicle is fitted with a trailer hitch, enter the customization menu in the infotainment unit and select
Tow Bar Att
. Select
Yes
if a tow ball tongue/neck is attached or
No
if a tow ball tongue/neck is removed. |
• | Drive the vehicle for longer than 20 seconds and at a speed greater than 17 km/h. |
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to
Testing for Intermittent Conditions and Poor Connections.