Removal Procedure
- Relieve fuel system pressure.
Refer to Fuel Pressure Relief Procedure
.
- Drain fuel tank. Refer to Fuel Tank Draining Procedure
.
- Remove the fuel tank. Refer to Fuel Tank Replacement
Removal Procedure.
- Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement
.
- Remove the fuel level sensor from modular fuel sender.
Installation Procedure
- Install the fuel level
sensor to modular fuel sender.
- Reinstall the fuel sender assembly. Refer to Fuel Sender Assembly Replacement
.
- Reinstall the fuel tank. Refer to Fuel Tank Replacement
Removal Procedure.
- Lower the vehicle.
- Refill tank and reinstall the fuel fill cap.
- Inspect for fuel leaks.
6.1. | Turn the ignition switch ON for 2 seconds. |
6.2. | Turn the ignition switch OFF for 10 seconds. |
6.3. | Turn the ignition switch ON. |
6.4. | Check for fuel leaks. |