Important: A short to ground will cause an open fuse(s). Before performing this diagnostic procedure, Inspect the fuse(s) for a open.

1. Use a fused jumper in order to backprobe terminal D of the remote control door lock receiver connector.
2. Close all of the doors. Close the rear deck lid.
3. Once the interior lamps turn off, ground the fused jumper.

Do the interior lamps light?

--

Go to Step 2

Go to Step 3

Replace the remote control door lock receiver. Refer to Receiver Replacement .

Is the repair complete?

--

System OK

--

Repair the open in CKT 1040 between the remote control door lock receiver and the left IP wiring harness junction block. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

System OK

--