For 1990-2009 cars only
Removal Procedure
- Remove the left side A-pillar defogger duct from under the instrument panel.
- Disconnect the wiring harness connector (3).
- Twist the switch counterclockwise in order to release the switch (4) from the retainer (2).
- Pull the switch rearward in order to remove the switch from the retainer.
Installation Procedure
- Install the switch (4) into the retainer (2).
- Slide the switch into the retainer until the switch plunger is fully depressed into the switch barrel. Orient the switch connector toward the one o'clock position.
- Twist the switch clockwise until travel stop is reached. The switch connector will face the three o'clock position when the switch is locked.
- Connect the wiring harness connector (3).
- Install the left side A-pillar defogger duct.
