Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
|
Important: A short to ground will cause an open fuse(s). Before performing this diagnostic procedure, inspect the fuse(s) for an open. | ||||
1 |
Does the motor operate? | -- | Go to Step 9 | Go to Step 2 |
2 |
Does the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 |
Does the test lamp light? | -- | Go to Step 6 | Go to Step 7 |
4 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 9 |
5 | Repair the open in CKT 294 between the left IP wiring harness junction block and the left front door lock motor. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | System OK | -- |
6 | Replace the left front door lock actuator. Refer to Door Control Module Replacement in Doors. Is the repair complete? | -- | System OK | -- |
7 |
Does the test lamp light? | -- | Go to Step 8 | Go to Step 9 |
8 | Repair the open in CKT 295 between the left front door lock motor and the left IP wiring harness junction block. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | System OK | -- |
9 | Replace the left IP wiring harness junction block. Refer to Relay/Fuse Center Replacement in Wiring Systems. Is the repair complete? | -- | System OK | -- |
