Important: When replacing the rear compartment lid lock striker, observe the following:

1. Remove the rear compartment lid lock striker nuts (2).



2. Remove the rear compartment lid lock striker (1).

1. Install the rear compartment lid lock striker (1).



2. Install the rear compartment lid lock striker nuts (2).

Hand tighten the rear compartment lid lock striker nuts.

3. Adjust the rear compartment lid alignment and closing effort as necessary.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Tighten the rear compartment lid lock striker nuts.

Tighten
Tighten the nuts to 7 N·m (62 lb in).