Turn Signal Switch Does Not Stay in Turn Position for Chevrolet Malibu 2000

The detent or cancelling spring is missing or broken.

Replace the components as necessary.

Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .

There is foreign material or loose parts obstructing the switch movement.

Inspect, clean and replace the switch as necessary.

Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .

The switch is not centered inside the column.

1. Inspect the following components:

•	The switch

•	Verify that the switch is correctly installed.

•	The mounting screw bosses on the lock housing cover.

2. Replace the components as necessary.

Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .

Replace the switch if the suggested problems do not exist.

Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .